If you’ve ever stepped into a hardware store, rummaged through a craft supply aisle, or watched a welder thread a spool through a machine, you’ve probably encountered flexible metal wire—but did you ever stop to ask what it’s actually called? As the owner of a metal wire supply company that’s been serving tradespeople, small manufacturers, crafters, and construction teams for over a decade, I get this question all the time. It’s not a one-size-fits-all answer, and the lingo can get confusing fast, especially when you’re trying to place an order for a specific job and don’t want to waste time sifting through the wrong products. Let me break this down plainly, from the most common terms to the technical details that matter for your project. Metal Wire

First, let’s start with the basics: not all metal wire is flexible. The rigid stuff you see for fence posts or rebar is designed to hold its shape, resist bending, and carry heavy loads. Flexible metal wire, by contrast, is built to bend without kinking, breaking, or losing its strength. That’s why it’s used for everything from hanging picture frames to wiring industrial machinery, from jewelry making to securing cargo on a truck. The most common umbrella term you’ll hear across most industries is stranded metal wire. That’s the product almost every supplier refers to when they say “flexible metal wire” on a spec sheet or an order form.
Wait, what makes stranded wire different from solid wire? Solid metal wire is a single, thin rod of metal—think of a paperclip, that’s solid. It’s strong, but it’s not flexible at all; bend it a few times and it’ll snap. Stranded wire, though, is made up of dozens, hundreds, even thousands of tiny individual metal strands twisted together in a tight, helical pattern. That little twist is what gives it give: each tiny strand can move independently of the others, so the whole wire bends easily without putting too much stress on any one part. I remember when I started in this business, a new customer once told me they’d been buying “flexible wire” for their custom lighting jobs that kept breaking after a week. When I looked at their order, they’d been getting solid wire by mistake. It’s a common mix-up, and one that can derail even the best plans.
But stranded wire isn’t the only term for flexible metal wire, and depending on your industry, you might hear a different name. Let’s go through the most frequent ones, so you can recognize what you’re looking for next time you order.
For the electrical trade, flexible metal wire is almost always called electrical stranded wire, or sometimes just hook-up wire. Electricians rely on this stuff every day for wiring homes, commercial buildings, appliances, and electronics. It’s typically made of copper (for conductivity, though aluminum is used for some high-voltage applications), coated in a plastic or rubber insulation that meets electrical codes, and comes in different gauges for different voltage loads. What makes this wire extra flexible is its strand count: a 14-gauge solid wire might have a diameter of just 1.6mm, while a 14-gauge stranded electrical wire could have 100 or more tiny strands packed inside, making it easy to route through tight spaces like wall cavities or device enclosures. I’ve had electricians tell me they’d never go back to solid wire for interior wiring jobs because it’s so much faster to work with—no more fighting to bend a stiff rod around a corner.
Then there’s the term you’ll hear in the construction and rigging industries: flexible steel cable, or sometimes just wire rope. Wait, is wire rope the same as flexible metal wire? Well, technically, wire rope is a type of flexible metal wire, but it’s on the heavier end of the spectrum. Wire rope is made of multiple strands of metal (usually steel) twisted together, then those strands are twisted around a central core. It’s way more durable than small electrical stranded wire, built to hold heavy loads—think lifting cranes, securing shipping containers, tying down construction materials, or making awnings. The flexibility here comes from the way the strands and core work together; a good quality wire rope can bend repeatedly under load without fraying or breaking. I once supplied a set of wire rope for a custom playground swing set, and the customer came back a year later to order a heavier gauge for a zip line they were building in their backyard. That’s the great thing about this category—its range is huge, from tiny cable for jewelry to thick rope for industrial lifting.
Craft and hobby industries have their own name too: jewelry wire, or craft flexible metal wire. This is the stuff crafters use for making necklaces, bracelets, earrings, wire-wrapped pendants, all kinds of DIY projects. It’s usually made of sterling silver, copper, brass, or gold-plated metal, and comes in different tempers (that’s a measure of how hard or soft the metal is). Soft-tempered jewelry wire is the most flexible, perfect for shaping delicate details, while half-hard is a little stiffer for projects that need to hold their shape, like bracelet bands. I hear from a lot of small craft business owners who worry about their wire breaking mid-project, so I always emphasize that for jewelry, you want to look for the “dead soft” temper, which is designed to be bent over and over without cracking.
There’s one more term that comes up a lot, and it’s easy to mix up with the others: braided metal wire. Braided wire is a variation of stranded wire, but instead of being twisted in a helical pattern, the strands are woven over and under each other, like a basket. That makes it even more flexible than standard stranded wire, and it’s also more resistant to kinking. You’ll see braided wire used for things like guitar strings, medical devices, or industrial hoses—places where constant bending or movement is common. I had a customer in the automotive industry order braided stainless steel flexible wire for custom brake lines a few years back, and they told me it outlasted the standard stranded steel wire by three times as long, because it didn’t kink when the vehicle was moving over rough terrain.
Now, you might be wondering: does the name really matter? Especially if you’re not an electrician or a jeweler, and you just need flexible wire for a general project. The short answer is yes, it does. If you order electrical stranded wire to build a garden trellis, you’re wasting money on insulated wire that’s designed for electricity, not outdoor structural support. If you order thin jewelry wire to lift a heavy engine, it’s going to snap and be a safety hazard. That’s why part of my job as a supplier is to help customers match the right wire name and product to their specific needs. A few years back, a homeowner emailed me asking for “flexible metal wire” to replace a broken fence section. They’d bought generic wire from a big box store that was too thin, and it broke after a week of wind. We helped them pick a galvanized carbon steel flexible stranded wire, specifically designed for fencing, which was thicker, weather-resistant, and had the right flexibility to bend with the ground instead of snapping. That’s the kind of personal touch I bring to this business—you’re not just ordering a product, you’re getting advice that saves you time, money, and frustration.
Let’s clear up one common misconception too: a lot of people call all flexible metal wire “aluminum wire” or “steel wire,” but those are just the materials, not the type. The name we use for flexible metal wire describes its construction, not the metal it’s made of. You can have flexible copper wire, flexible stainless steel wire, flexible brass wire—all of them are stranded, braided, or some variation of the designs I mentioned earlier. For example, stainless steel flexible wire is super popular for outdoor projects because it resists rust, while copper flexible wire is preferred for jewelry and electrical work because it’s easy to solder.
Another thing I see customers mix up is the difference between flexible metal wire and spring wire. Spring wire is actually a type of rigid wire that’s designed to hold its shape and recoil when bent; it’s not flexible in the way we’re talking about here. If you need something that bends easily without springing back, that’s stranded or braided wire, not spring wire. I learned that the hard way early on, when a customer ordered spring wire to make custom book bindings, and complained that it wouldn’t bend to fit. Turns out he just needed a thinner gauge of flexible stranded copper wire instead.
So, to recap what we’ve covered: the general term for flexible metal wire is stranded metal wire. Depending on your industry and use case, it might also be called electrical stranded wire, wire rope, jewelry wire, or braided metal wire. Each name refers to a specific construction, material, or application, and choosing the right one makes all the difference for your project’s success.

Now, if you’re working on a project and you’re not sure which flexible metal wire you need, or you’re tired of dealing with suppliers that send you the wrong product, I’m here to help. I’ve spent years getting to know every type of flexible metal wire we carry, from the smallest gauge jewelry wire to the heavy-duty wire rope for industrial use. I can walk you through the specs, the materials, and the best option for your specific job, no sales pitch, no confusing jargon, just straight talk from someone who’s been in this business long enough to know what works. If you’re ready to place an order, or just have questions about flexible metal wire, reach out to discuss your requirements.
Refractory Hex Mesh and Anchor References
- Metals Handbook: Wire and Wire Products, 10th Edition, ASM International.
- Electrical Installation Code for Flexible Wire, National Fire Protection Association (NFPA 70).
- Wire Rope Safety and Application Guide, Occupational Safety and Health Administration (OSHA).
- Jewelry Making Wire Specifications, Craft and Hobby Association (CHA) Material Standards.
- Braided Metal Wire: Properties and Industrial Applications, Society of Manufacturing Engineers (SME) Technical Paper 2019-0032.
Anping Chenran Wire Mesh Co., Ltd.
We’re well-known as one of the leading metal wire manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to buy high quality metal wire in stock here from our factory.
Address: 500 Meters North of Guozhuang Village, Daziwen Town, Anping County, Hengshui City, Hebei, China
E-mail: sales@chenranwiremesh.com
WebSite: https://www.chenranwiremesh.com/