Posted in

How often should a manhole sprayer be serviced?

Hey everyone, and welcome back to the blog! If you’re in the wastewater management or municipal maintenance game, you’ve probably had a run-in with a manhole sprayer—whether you’re using one to clean manhole walls, treat sewer odors, or apply anti-corrosion coatings to underground infrastructure. As someone who’s been supplying these bad boys for over a decade, I get the most random questions, but the one that comes up all the time is: “How often do I actually need to service my manhole sprayer?” Manhole Sprayer

It’s a fair question, honestly. A lot of folks treat these sprayers like set-it-and-forget-it tools, and then wonder why they’re sputtering mid-job or leaking sewer gunk all over the place. Let’s cut through the noise—there’s no one-size-fits-all answer, but there are solid rules based on real use, not just some vague industry jargon. I’m gonna break this down like I chat with my customers over a beer after a long workday, no stuffy manuals here.

First off, let’s set the scene: what do manhole sprayers actually do? For the newbies, they’re portable (or sometimes truck-mounted) units that blast water, chemicals, or both into manholes to clean built-up grease, scum, and sludge, neutralize odors with sanitizers, or protect concrete from rotting. They’re not like your garden hose—they have pumps, hoses, nozzles, tanks, and filters, all of which take a beating every time you fire ’em up.

So how often should you service ’em? Let’s start with the two biggest factors: how often you actually use the sprayer, and what kind of conditions you’re operating in. I’ve got customers who run their units 5 days a week, 40 weeks a year, and others who pull theirs out once a month for occasional odor control. Those two scenarios need totally different service schedules.

Let’s start with heavy-use units—think guys on a municipal maintenance crew that uses a sprayer 4–5 times a week, or a contractor doing sewer line cleaning contracts that require daily manhole treatments. For these workhorses, I tell ’em to do a quick “pre-use check” before every single job and a full service every 100 hours of operation. Wait, 100 hours? That’s not as much as you think—if you’re using it 5 days a week, that’s like 20 weeks, so roughly every 5 months. Let me explain why that’s non-negotiable. When you’re blasting high-pressure water and chemicals, the pump’s seals take a pounding. If you skip checking those, you’ll end up with a leaky pump that loses pressure mid-clean, and that means you’re wasting time and money on extra water/chemicals, plus you’re leaving residue in the manhole. Also, those filters—sucker traps all the scum and gunk from the spray solution. If you don’t clean them every 100 hours, they clog, which cuts down on pressure, and then you’re not getting the spray far up the manhole wall where the odor-causing bacteria lives. I had a customer last year who skipped that service, and his nozzle got so caked with hardened grease that he had to cut a whole workday short—cost him extra labor, and he had to replace a $80 nozzle because he tried to unclog it with a pick and messed up the tip. Don’t be that guy.

Now for light-use units—folks who only use their manhole sprayer every 1–4 weeks, usually for odor control in small neighborhoods or a handful of manholes. For these, the schedule is way more relaxed, but still important. Quick pre-use check before every use, and a full service every 25–50 hours of total operation, or at least twice a year, even if you didn’t hit that 50-hour mark. Wait, why twice a year if you only use it 10 hours total? Because manhole sprayers have parts that degrade sitting around, too. The hoses get brittle, the seals dry out, and if you store it with chemical residue in the tank, that gunk settles and gets hard to scrub out. I had a small-town public works director hit me up last spring—he’d used his sprayer once every couple months for two years, never serviced it, and when he finally turned it on, the tank valve was so clogged with old sanitizer that it wouldn’t spray at all. He ended up having to replace the whole valve, which cost him more than a full annual service would’ve. That’s the thing with equipment that sits: just because you’re not using it doesn’t mean it doesn’t need a little TLC.

Okay, so what exactly does a full service include? I’m not gonna list every tiny part, but the non-negotiable stuff that makes or breaks your sprayer: first, drain and clean the tank—no leftover chemicals or water, that’s a must. Check all hoses and fittings for cracks or leaks; even a tiny pinhole will drop pressure like crazy over time. Test the pump pressure to make sure it’s hitting the manufacturer’s specs (pro tip: if it’s 10% lower than it should be, you need to adjust the pressure relief valve or check the seals). Clean or replace the inlet and spray nozzles—clogged nozzles are the #1 complaint I get from customers. Flush the whole system with clean water to get rid of any leftover gunk, and then lubricate any moving parts, like the pump’s crankshaft or the valve stems, so they don’t seize up. Oh, and if you use chemical solutions (most people do for odor control), check for any corrosion on the metal parts of the sprayer—some chemicals can eat through aluminum or steel over time if you don’t rinse regularly.

Wait, are there any exceptions to these rules? Hell yeah, and I always remind my customers to adjust based on their local conditions. If you’re working in an area with super heavy grease and sludge—like a downtown commercial district with tons of restaurants—your sprayer is gonna get way gunkier, so you should bump up the full service to every 75 hours instead of 100. If you’re in a super humid or cold climate? Cold weather can make seals brittle, humid conditions can cause mold in the tank, so again, more frequent service. I had a customer in Minnesota last year who said his unit would only work in summer, not winter—turns out he’d stored it without draining the water, and the lines froze and cracked. He did learn his lesson: now he services it every fall before winter, and it works all year.

Also, let’s talk about cost here because I know everyone’s bottom line matters. A full service from a reputable tech (or if you’re handy, doing it yourself with a good kit) usually costs like 5–10% of the price of a new manhole sprayer. Compare that to the cost of replacing a pump (which is like 20–30% of the unit’s cost) or wasting labor time because your sprayer breaks mid-job. Last quarter, I had a customer who skipped service, had his pump die on a job, and lost a $2,000 contract because he couldn’t finish the work. That’s way more than a year’s worth of services, right?

Here’s the thing I always tell people: a manhole sprayer is only as good as the care you put into it. It’s not a lawn ornament that you pull out when you need it. It’s a tool that keeps sewer odors under control, protects infrastructure from corrosion, and keeps communities clean. Skipping service might save you a few bucks upfront, but it’ll end up costing you more in the long run—lost time, replacement parts, even lost work.

If you’re still not sure where you fall on the service schedule, or you need a good service kit, or you’re in the market for a new manhole sprayer that’s built to handle whatever your job throws at it, hit me up. I don’t do pushy sales stuff—just honest advice from someone who’s been in this game too long to give you B.S. We can talk through your use case, figure out exactly how often you need to service, and make sure your sprayer runs like a champ for years.

Now, quick notes for everyone whether you service yourself or hire someone: don’t forget the small stuff between full services. The pre-use check is just 2 minutes—look for leaks, make sure the nozzle isn’t clogged, test a quick spray before you climb on that truck and drive to the job. That tiny check can save you hours of headache later. And when you store your sprayer, always drain the tank and hoses, wipe down any residue, and keep it in a dry, covered spot if you can.

At the end of the day, there’s no “right” number that works for every sprayer, every crew, every town. But follow the rough guidelines I laid out: heavy use = 100 hour full service, light use = twice a year or 50 hours, adjust for your local conditions, and never skip that quick pre-use check. Your sprayer will thank you, your crew will be happier, and the manholes (and your community) will be way cleaner.

If you have questions about servicing your manhole sprayer, need help picking out parts, or are ready to upgrade to a unit that’s built for reliability, don’t hesitate to reach out. I’m always here to help, no strings attached.

Refractory Gunning Machine References:

  1. National Association of Sewer Service Companies. (2021). Manhole Maintenance Best Practices. NASSCO Press.
  2. American Public Works Association. (2022. Equipment Maintenance Guidelines for Municipal Wastewater Tools). APWA Publications.
  3. U.S. Environmental Protection Agency. (2020. Best Management Practices for Sewer Odor Control and Infrastructure Protection). EPA Office of Water.

Zhejiang Wengong Intelligent Technology Co., Ltd.
Zhejiang Wengong Intelligent Technology Co., Ltd. is one of the most professional manhole sprayer manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy durable manhole sprayer made in China here and get quotation from our factory. Quality products and reasonable price are available.
Address: No.111 Huakang Road, Liuao Village, Qiaoxia Town, Yongjia County, Wenzhou City, Zhejiang Province, China
E-mail: sales007@cngcjx.com
WebSite: https://www.wallgoe.com/