{"id":3803,"date":"2026-11-22T16:46:37","date_gmt":"2026-11-22T08:46:37","guid":{"rendered":"http:\/\/www.fabriketmoi.com\/blog\/?p=3803"},"modified":"2026-11-22T16:46:37","modified_gmt":"2026-11-22T08:46:37","slug":"can-metal-cable-glands-be-used-in-hot-temperatures-4083-de0b60","status":"publish","type":"post","link":"http:\/\/www.fabriketmoi.com\/blog\/2026\/11\/22\/can-metal-cable-glands-be-used-in-hot-temperatures-4083-de0b60\/","title":{"rendered":"Can metal cable glands be used in hot temperatures?"},"content":{"rendered":"<p>Hey everyone, it\u2019s Jake from the metal cable glands team\u2014before you ask, yes, I\u2019ve fielded this exact question a dozen times in the last month alone from folks in automotive assembly lines, oil and gas refineries, even some small-scale foundries testing new equipment. The short answer? It depends on which metal cable glands you use, how you spec them, and if you\u2019re pairing them with the right supplementary parts for your specific heat load. The long answer is where the real value is, so let\u2019s dive in without the engineering jargon that makes your eyes glaze over. <a href=\"https:\/\/www.gordon-elec.com\/cable-gland\/metal-cable-glands\/\">Metal Cable Glands<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.gordon-elec.com\/uploads\/34489\/small\/push-pin-zip-tie5a6f5.jpg\"><\/p>\n<p>First, let\u2019s talk about why this question matters so much right now. In 2024, we\u2019ve seen a huge uptick in projects moving into extreme heat environments\u2014think desert-based solar farms running 12-hour days at 140\u00b0F, or manufacturing lines where furnaces and stoves raise ambient temps to 180\u00b0F in the machinery bay. A standard plastic cable gland would melt, warp, or secrete toxic gasses under those conditions, which is why more teams are turning to metal alternatives. But not all metal cable glands are created equal, and that\u2019s where I see most people slipping up.<\/p>\n<p>Let\u2019s break down the metals we work with most at our facility: brass, stainless steel, and aluminum. Each behaves totally differently when the temperature climbs, and each has a sweet spot for hot environments. Brass is the workhorse, right? It\u2019s affordable, easy to machine, and has a melting point around 1,650\u00b0F. Wait, that sounds like a lot\u2014why isn\u2019t brass the go-to for every heat application? Because brass expands way more than stainless steel. You have to account for thermal expansion, or you\u2019ll end up with gaps between the gland, the cable, and the enclosure. If there\u2019s even a tiny gap, you lose the IP rating (ingress protection\u2014think dust, water, debris) that the gland is supposed to provide, and worst case, moisture or dust gets in and causes a short circuit in a control panel. That\u2019s a huge headache no one needs.<\/p>\n<p>Stainless steel is the star of the show for hot environments. 316L stainless steel, specifically. It has a melting point near 2,600\u00b0F, and its thermal expansion rate is almost 50% lower than brass, which means it holds its shape even when temps jump from 70\u00b0F to 200\u00b0F in an hour. We tested a batch of our 316L stainless steel cable glands last year in partnership with a wind turbine company that installs their gear on mountain tops where summer temps reach 170\u00b0F and winter drops to -40\u00b0F. After 12 months of use, when they pulled one gland for inspection, there was zero warping, zero gaps, and the IP68 rating was still intact. That\u2019s the kind of performance we aim for. Don\u2019t mistake 304 stainless steel for 316L, though\u2014304 has a much lower melting point, around 2,500\u00b0F, and it\u2019s more prone to corrosion in high-heat, high-humidity environments like coastal refineries. I\u2019ve seen teams grab 304 by mistake and end up replacing glands twice a year, which adds up fast.<\/p>\n<p>Aluminum is a third option, and it\u2019s lighter than both brass and stainless steel, with a melting point around 1,220\u00b0F. That sounds low, but it\u2019s actually perfect for mid-heat applications\u2014think food processing plants where ambient temps hit 120\u00b0F near ovens, or commercial HVAC systems. Aluminum\u2019s thermal expansion is on par with brass, so you still need to pair it with a high-quality sealing element that can flex with the movement, but it\u2019s a great budget pick for environments that aren\u2019t pushing 200\u00b0F+.<\/p>\n<p>Now, the part no one tells you: the temperature rating of a metal cable gland isn\u2019t just about the metal itself. It\u2019s also about the gasket and sealing material inside. Most people only ask for metal glands and forget that the rubber or plastic seal is what actually keeps out elements and grips the cable. Silicone gaskets? They can handle up to 450\u00b0F, which is way higher than the melting point of most metal glands. Neoprene? That maxes out around 200\u00b0F, so if you\u2019re running at 250\u00b0F, a neoprene seal will harden, crack, and fail long before the brass or stainless steel does. We always make a point to ask customers what temperature their enclosure runs at, so we can recommend the right seal\u2014silicone for extreme heat, EPDM for mid-range heat and outdoor use, even high-temperature Viton for applications near furnaces where temps hit 500\u00b0F. Viton is a game-changer for those super hot spots; it\u2019s flexible up to 400\u00b0F and stable up to 500\u00b0F, so it won\u2019t break down when exposed to radiant heat.<\/p>\n<p>I also want to talk about misapplication, because that\u2019s where most failures happen. Last year, a customer from a mining operation came to us with a problem: their metal cable glands were failing within three months in a new ore processing line. They were using brass glands, and the ambient temp in the line was averaging 220\u00b0F, with spikes up to 250\u00b0F. We looked at their setup and saw they were using neoprene seals, which we already knew isn\u2019t rated for that heat, but also\u2014they were overtightening the glands to compensate for thermal expansion. Overtightening a metal cable gland can crush the cable\u2019s insulation, especially if it\u2019s a thin or flexible cable, leading to insulation degradation over time. We switched them to 316L stainless steel glands with silicone seals, adjusted their tightening torque to the manufacturer\u2019s spec, and after six months, they haven\u2019t had a single failure. That\u2019s the kind of solution we love to deliver.<\/p>\n<p>Another common question: what about extreme radiant heat, like near a furnace or a kiln? Metal cable glands that are exposed to direct radiant heat (not just ambient temp) need extra consideration. Even if a 316L stainless steel gland can handle 2,600\u00b0F, the seal can\u2019t. So for those applications, we recommend glands that are designed with a heat shield or using mineral-based sealing materials, not rubber. We\u2019ve had custom orders for kiln control systems where we use metal glands with compressed asbestos-free mineral seals, which can handle direct radiant heat up to 1,200\u00b0F, way higher than rubber seals. It\u2019s not a one-size-fits-all solution, which is why we take the time to ask customers about their specific environment, not just \u201cwhat\u2019s your temperature?\u201d<\/p>\n<p>Wait, let\u2019s address a myth I hear all the time: metal is always better for heat. That\u2019s not true. For temperatures under 180\u00b0F, plastic cable glands are perfectly fine, lighter, cheaper, and easy to install. But once you climb above 180\u00b0F, plastic will start to lose its structural integrity, outgassing, warping, or failing to provide the required IP rating. We\u2019ve tested plastic glands in a 200\u00b0F oven and had one melt completely in just two hours, while a 316L stainless steel gland sitting right next to it showed no change. That\u2019s a clear difference, and it\u2019s why we only recommend metal glands for high-heat applications.<\/p>\n<p>Now, let\u2019s get to maintenance, because even the best metal cable glands won\u2019t last if you don\u2019t take care of them. In hot environments, metal expands and contracts more often than in moderate temps, so you should inspect glands every six months, not every year. Check for gaps between the gland and the enclosure, cracks in the seal, or signs of corrosion (especially in high-heat, salty environments like coastal power plants). We also recommend retorquening glands once a year after the initial installation, to account for any minor shifting from thermal expansion. It\u2019s a small step, but it prevents a lot of avoidable failures.<\/p>\n<p>At the end of the day, the answer to \u201ccan metal cable glands be used in hot temperatures?\u201d is a resounding yes\u2014if you spec the right type of metal, the right seal, and install and maintain them correctly. We\u2019ve supplied metal cable glands to projects across industries, from solar farms in Arizona to refineries in Texas, and the most successful partnerships are the ones where we don\u2019t just send a product, we work with the customer to make sure it fits their specific needs.<\/p>\n<p>If you\u2019re working on a project that involves high temperatures, and you\u2019re not sure which metal cable glands are right for you, or you\u2019ve had issues with failing glands in the past, we\u2019re here to help. We can walk you through material specs, seal options, torque requirements, and anything else you need to make sure your setup works reliably, no matter how hot it gets.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.gordon-elec.com\/uploads\/34489\/small\/plenum-rated-zip-tie3ac5f.jpg\"><\/p>\n<p>Reach out to our team to discuss your project details and find the right solution for your application.<\/p>\n<p><a href=\"https:\/\/www.gordon-elec.com\/custom-cable-ties\/custom-nylon-cable-tie\/\">Custom Nylon Cable Ties<\/a> References<\/p>\n<ol>\n<li>International Electrotechnical Commission (IEC) 62444: Cable Glands, Joints and Accessories for Electrical Equipment<\/li>\n<li>ASME Boiler and Pressure Vessel Code (BPVC) Section II: Material Specifications<\/li>\n<li>DuPont Viton Fluoroelastomer Technical Data Sheet, 2023 Edition<\/li>\n<li>NEMA Standard 250: Ingress Protection (IP) Ratings for Enclosures, 2022 Revision<\/li>\n<li>Copper Development Association: Thermal Properties of Brass Alloys for Industrial Applications, 2021<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.gordon-elec.com\/\">Hangzhou Gordon Electric Co., Ltd.<\/a><br \/>Hangzhou Gordon Electric Co., Ltd. is well-known as one of the leading metal cable glands manufacturers and suppliers in China. We warmly welcome you to wholesale high quality metal cable glands at competitive price from our factory. For custom service, contact us now.<br \/>Address: No.173 Xingqiao North Road, Yuhang District, Hangzhou, Zhejiang 31100, China<br \/>E-mail: jeson@gordon-elec.com<br \/>WebSite: <a href=\"https:\/\/www.gordon-elec.com\/\">https:\/\/www.gordon-elec.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, it\u2019s Jake from the metal cable glands team\u2014before you ask, yes, I\u2019ve fielded this &hellip; <a title=\"Can metal cable glands be used in hot temperatures?\" class=\"hm-read-more\" href=\"http:\/\/www.fabriketmoi.com\/blog\/2026\/11\/22\/can-metal-cable-glands-be-used-in-hot-temperatures-4083-de0b60\/\"><span class=\"screen-reader-text\">Can metal cable glands be used in hot temperatures?<\/span>Read more<\/a><\/p>\n","protected":false},"author":242,"featured_media":3803,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3766],"class_list":["post-3803","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-metal-cable-glands-46fa-de39ac"],"_links":{"self":[{"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/posts\/3803","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/users\/242"}],"replies":[{"embeddable":true,"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/comments?post=3803"}],"version-history":[{"count":0,"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/posts\/3803\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/posts\/3803"}],"wp:attachment":[{"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/media?parent=3803"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/categories?post=3803"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.fabriketmoi.com\/blog\/wp-json\/wp\/v2\/tags?post=3803"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}